An Advanced Approach to Improve Synchronization Phase Accuracy with Compressive Sensing for LT-1 Bistatic Spaceborne SAR

Abstract

In the bistatic synthetic aperture radar (BiSAR) system, the unavoidable frequency deviation between the oscillators (USOs) will result in additional phase modulation in the demodulated radar signal, which significantly degrades the quality of the SAR image and digital elevation model (DEM) product. The innovative L-band spaceborne BiSAR system LuTan-1 (LT-1) employs a non-interrupted synchronization scheme to acquire the synchronization phase error. This advanced phase synchronization scheme avoids interrupting the normal BiSAR data acquisition and further increases the synchronization frequency. However, some non-ideal factors in the transmission link like attenuation, multipath effect, interference, etc., may cause the synchronization phase to be polluted by noise. A phase denoising approach based on compressive sensing (CS) is proposed to improve the accuracy of synchronization phase. The imaging phase with high signal-to-noise ratio (SNR) is input into the K-SVD algorithm to learn the prior information, and then the noise of the synchronization compensation phase is eliminated by maximum a posteriori (MAP) estimation. The data acquired from the ground validation system of the LT-1 synchronization module are adopted for the validation experiment. The proposed phase denoising method achieves higher phase synchronization accuracy compared with traditional ones. The processing results verify the effectiveness of the proposed method and demonstrate its potential for future on-orbit applications of the LT-1 mission.

Keywords

• bistatic synthetic aperture radar
• LT-1
• phase synchronization
• compressive sensing