A process optimization approach for microwave vacuum drying of concentrated skim milk

Abstract

ABSTRACT: Microwave vacuum drying (MVD) of concentrated skim milk and its resulting powder properties have been studied to a very limited extent. To explore the potential of this technology for the manufacture of milk powder, MVD of concentrated skim milk (37.5% total solids) was evaluated with respect to product properties and drying efficiency. A custom factorial design was used to optimize drying parameters, which enabled us to find optimal drying conditions with a minimal number of drying experiments (16). Vacuum level (3.3–13.3 kPa), specific power input (0.86–1.72 W·g −1), and product layer thickness (1–4 mm) were studied as factors. Total drying time, product foaming at the beginning of the process, product temperature in the last drying interval, browning, insolubility index, and calculated product yield were used as responses to identify optimal MVD processing parameters. Optimal drying of concentrated skim milk that maximized yield and minimized drying time while maintaining good product quality was achieved at a layer thickness of 2 mm, pressure of 6.0 kPa, and a specific power input of 1.29 W·g −1. Under constant power output, layer thickness was found to be the most important processing parameter to control product temperature during the final drying stage. Maximum product temperatures below 55°C yielded powder with good solubility. The findings of this exploratory study for MVD of concentrated skim milk yield important information and guidelines for production of good quality milk powders or preservation of starter cultures in a dairy matrix such as infant formula.

Keywords

• microwave vacuum drying
• concentrated skim milk
• factorial design
• process optimization