Investigation of microstructural attributes of steel surfaces through magneto-optical Kerr effect

Abstract

Magneto-optical Kerr effect (MOKE) microscopy is a versatile technique to image magnetic domains and evaluate the behavior of magnetic materials. However, MOKE has been rarely applied to the research of low magnetic steels with complex microstructure including micron-sized features. This study reveals the potential of implementing MOKE microscopy for analyzing the microstructure and stress state of martensitic steels with high carbide density (example conducted on AISI M2 steel grade). For the first time, the resulting MOKE domain images are used to analyze the size and morphology of martensite lath structures without chemical etching of the material's surface. Furthermore, MOKE microscopy allowed the confirmation and volumetric fraction estimation of retained austenite, despite the small size and volumetric fraction of under 1%. The validity of the MOKE microscopy analysis is cross-checked with scanning electron microscopy of etched samples and X-ray diffraction. Finally, MOKE microscopy in combination with Vickers indentation is applied to determine the residual stress state of the selected steel, which was varied by processing the steel material with conventional heat treatment scheme and heat treatment including deep cryogenic treatment (DCT). The method is proven effective in indicating the residual stress qualitatively. The measurements proved, that the residual stresses are significantly reduced in DCT steel samples, as theoretically anticipated. The conducted pioneering work provides important research towards the application of MOKE microscopy for the research of steel microstructure, properties and residual stresses as well as delivers a new perspective for determining the effectiveness of DCT on the steel properties.

Keywords

• Steel
• Microstructure
• Magnetic domains
• Magnetism
• Residual stresses
• Magneto-optical Kerr effect microscopy