Sustainable carbon capture via halophilic and alkaliphilic cyanobacteria: the role of light and bicarbonate

Abstract

The two-step photosynthetic biogas upgrading process, which combines CO2 capture by carbonate solution and carbonate regeneration by using aquatic microbial oxygenic photoautotrophs (i.e., cyanobacteria, algae, and diatoms), may provide a potential alternative to the commercial routes used for gaseous biofuel upgrading. Such a process not only provides a green and low energy intensive biogas upgrading pathway but also converts CO2 in biogas into high value biomass. To improve the upgrading performance, the effects of light intensity and NaHCO3 concentration on the growth and the HCO3- transformation characteristics of halophilic and alkaliphilic Spirulina platensis were investigated in this study. Experimental results showed that the light attenuation of S. platensis culture was significant. Increasing light intensity up to 210 μmol m-2 s-1 effectively improved the S. platensis growth and photosynthetic pigment accumulation. S. platensis could grow in the range of 0.05 to 0.6 M NaHCO3, and a maximum biomass concentration of 1.46 g L-1 was achieved under an optimal growth condition of 0.1 M NaHCO3, which was 65.9% higher than at 0.05 M NaHCO3. Moreover, the bicarbonate utilization efficiency reached 42.0%. Finally, in a case study, a biogas stream at a flow rate of 800 m3 h-1 could generate biomass up to 344 kg h-1, corresponding an energy value of 5591 MJ h-1.

Keywords

• biogas upgrading
• spirulina platensis
• light attenuation
• bicarbonate
• fermentation