Impact of Coal Orthotropic and Hydraulic Fracture on Pressure Distribution in Coalbed Methane Reservoirs

Abstract

Coalbed methane (CBM) shows tremendous in situ reserves, attracting a great deal of research interests around the world. The efficient development of CBM is closely related to the dynamic pressure distribution characteristics in the coal seam. As the dominant component of the geological reserve for CBM, the adsorption-state gas will not be exploited until the local coal pressure becomes less than the critical desorption pressure. Therefore, although the CBM reserve is fairly large, the production performance is generally limited, with a poor understanding of the dynamic pressure field during the CBM production. In this work, in order to address this issue properly, the coal’s inherent properties, the coal’s orthotropic features, as well as artificial hydraulic fracturing are considered, all of which affect pressure propagation in the coal seam. Notably, to the current knowledge, the impact of coal’s orthotropic features has received little attention, while the coal’s orthotropic features are formed during a fairly long geological evolution, changing the dynamic pressure field a lot. Numerical simulation is performed to shed light on the pressure propagation behavior. The results show that (a) coal’s orthotropic features mitigate the depressurization process of CBM development; (b) the increasing length of a hydraulic fracture is helpful for efficient decline in the average formation pressure; and (c) there exists an optimal layout mode for multi-well locations to minimize the average pressure. This article provides an in-depth analysis upon pressure distribution in CBM reservoirs under impacts of coal orthotropic feature and hydraulic fractures.

Keywords

• coal orthotropic
• hydraulic fractures
• CBM
• production
• pressure propagation