AIP Advances (Dec 2019)

A novel electro-active bushing based on dielectric elastomer and circular double-V auxetic structure

  • Yuanlong Wang,
  • Yi Yu,
  • Zhen Li,
  • Chunyan Wang,
  • Wanzhong Zhao

DOI
https://doi.org/10.1063/1.5100017
Journal volume & issue
Vol. 9, no. 12
pp. 125109 – 125109-8

Abstract

Read online

A novel electro-active bushing (EAB) design is proposed based on the unique physical properties of dielectric elastomers. A dielectric elastomer is applied as the tendon layer to a circular two-dimensional double-V auxetic structure. When load and voltage excitation vary, mechanical performance and dimensions of dielectric elastomers change, which empowers EAB to realize an electrostrictive phenomenon and real-time variable stiffness under different voltages. An EAB structure can endure mechanical loads along all directions in a cross-sectional plane, which is more practical than our previous design which can only bear loads along one direction. A theoretical electromechanical model of an EAB unit cell was proposed based on the physics theory of dielectric elastomers. The influences of unit cell parameters on electromechanical responses were researched. Moreover, an EAB prototype was fabricated via the 3D printing method. The experiments using EAB prototype applied 3M VHB 4910 and 3M VHB 9473 acrylic membranes prestretched by 200% and 300%, respectively, were conducted. The results indicated that the electrostrictive displacement increases as the load increases, and the stiffness decreases with the rise in voltage. Greater stiffness is obtained by higher original thickness and prestretch rates, but the electrostrictive displacement and stiffness variation under high excitation was dramatically affected.