Experimental Investigation on Indicated Pressure and Heat Release for Direct Hydrogen Injection in a Dual Fuel Diesel Engine

Abstract

This paper presents the research results for a diesel and hydrogen fueled engine. The research object is a four-cylinder, four-stroke ADCR engine with a displacement of 2,636 cm3. In the experiments, glow plugs were replaced with compressed hydrogen injectors and a special adapter. Hydrogen was supplied directly into a combustion chamber using a test injector. A hydrogen dose in the tests was changed at selected test points and ranged from 0 to 160 dm3/min. The research were conducted at 1,500 rpm. A hydrogen injection start angle and maximum hydrogen dose were specified from the preliminary experiments. The following parameters were analyzed: indicated mean effective pressure, maximum pressure, crank angle of maximum cylinder pressure occurrence and heat release. The obtained results were statistically analyzed. The conducted analysis focused on determining whether there are significant differences between early and late injection and how these changes affect the measured parameters.

Keywords

• diesel engine
• combustion engine
• dual fuel
• direct hydrogen injection