Review of MIG and TIG welding current variation of low-carbon steel materials based on tensile strength

Abstract

SS400 and ASTM A36 a low-carbon steel materials that are used in the industry in the connection process to create materials according to the design. The aim of this research is to review the mechanical properties that occur in low-carbon steel materials in the MIG and TIG welding process with current variations and provide advice on low-carbon steel in welding. The materials used are ASTM A 36 and SS 304 steel. MIG welding uses a plate with a thickness of 6mm and uses AWS A5.18 ER 705-6 electrode diameter of 1.2mm. TIG welding uses a cylinder with a diameter of 6mm. The method of this review reported the tensile strength of low-carbon steel ASTM A36 with current variations of 150, 155, and 160A for MIG. Current variations of SS304 low-carbon steel are 80, 100, and 120A for TIG. The result of tensile strength with the MIG process produces the highest average current of 150 A of 354.92MPa. The results of tensile strength TIG process for 100A of 1007.31 MPa. The suggestion of this review is in MIG welding a greater current is required to obtain a high tensile strength value than the current required for TIG welding on low-carbon steel ASTM A 36 with a carbon content of 0.29% C and on SS304 with a carbon content of 0.042% - 0.07% C. Welding for stainless steel material can be used on TIG welding to get maximum tensile strength values. For ASTM A36 steel materials, MIG welding can be an option.