Examining the Effect of MnS Particles on the Local Deformation Behavior of 8MnCrS4-4-13 Steel by In Situ Tensile Testing and Digital Image Correlation

Abstract

In this study, the behavior of MnS particles in a steel matrix is investigated through in situ tensile testing and digital image correlation (DIC) analysis. The goal of this research is to understand the mechanical behavior of MnS inclusions based on their position in the steel matrix. To accomplish this, micro-dog bone-shaped samples are prepared, tensile tested, and analyzed. Macro-mechanical results reveal that the material yields at a stress of 350 MPa and has an ultimate tensile strength of 640 MPa, with a total elongation of 17%. For micro-mechanical analysis, scanning electron microscopy (SEM) images are taken at incremental strains and processed using DIC software to visualize the local strain evolution. The DIC analysis quantifiably demonstrates that the local strain is highest in the ferrite matrix, and while lowest in the pearlite matrix, the MnS particles and the interfaces between different materials experienced intermediate strains. The research provides new insights into the micro-mechanical deformation behavior of MnS particles in a steel matrix and has the potential to inform the optimization of the microstructure and properties of materials containing MnS inclusions.

Keywords

• MnS inclusions
• steel matrix
• in situ testing
• DIC analysis
• mechanical behavior
• microstructural analysis