Journal of King Saud University: Science (May 2023)
Construction of an optical sensor for molybdenum determination based on a new ionophore immobilized on a polymer membrane
Abstract
Objectives: In this study, a new optical chemical sensor to assess molybdenum ion by incorporation of 1-(2-benzothiazolylazo)-2-hydroxy-3-naphthoic acid (BTAHN), dibutylphthalate (DBP) and sodium tetraphenylborate (NaTPB) to the plasticized poly vinyl chloride (PVC) matrices were prepared. Methods: When DBP was added to the membrane, the ionophore's tendency to act as a chromoionophore was greatly increased. Great stability, reproducibility, extended life time, and respectable selectivity for Mo6+ ion assessment throughout a wide number of transition, lanthanides, and heavy metals were all advantages of the accomplished sensor. Results: At optimum compositions and investigational circumstances, the sensor response was linear cross range of 8.5 × 10−8 to 4.4 × 10−5 mol/L. Sensor detection and quantification limits realistic on the definition that the sample amount results in a signal equal to the blank signal plus three and ten times of its standard deviation were establish to be 2.5 × 10−8 and 8.3 × 10−8 mol/L. The sensor reaction time (characterized as the time it required for the absorbance value to reach 95 %) was 3.0–5.0 min. Conclusions: The achieved optical sensor was successfully applied to assess Mo6+ ion content in water, food, plant, and environmental samples.