Use of Laser Metal Deposition Technology in Additive Manufacturing of Ni Powder Materials

Abstract

The process parameters of the Laser Metal Deposition technology in the production of simple components made of NiCuBSi type metal powder were verified in this paper. A laser head with a coaxial powder supply and argon gas was used in the production. The powder was welded to a S235J2G3 steel plate. The used parameters (heat input 0.25 kJ.mm−1) enabled the production of samples with a minimum porosity (1.2 %) and without the defects (cold joints, pores) between the weld layers.

Keywords

• additive manufacturing
• laser metal deposition
• self-fluxing nicubsi metal powder