Advanced Materials Interfaces (Mar 2023)

Correlation between Surface Reactions and Electrochemical Performance of Al2O3‐ and CeO2‐Coated NCM Thin Film Cathodes

  • Hendrik Hemmelmann,
  • Raffael Ruess,
  • Philip Klement,
  • Jörg Schörmann,
  • Sangam Chatterjee,
  • Joachim Sann,
  • Matthias T. Elm

DOI
https://doi.org/10.1002/admi.202202268
Journal volume & issue
Vol. 10, no. 9
pp. n/a – n/a

Abstract

Read online

Abstract Depositing ultrathin oxide coatings has been proven a successful approach to stabilize the surface of LiNixCoyMnzO2 active cathode material in lithium‐ion batteries (LIB). The beneficial effect of Al2O3 coatings arises at least partly from spontaneous reactions between coating and liquid electrolyte. However, it remains unclear if comparable surface reactions occur for other oxide coatings. One difficulty is the characterization of reaction products at the cathode–electrolyte interface due to the multi‐phase properties of composite cathodes. Here, thin films are utilized as model systems to correlate surface reactions with the performance of Al2O3‐ and CeO2‐coated nickel cobalt manganese oxides (NCM). Electrochemical characterization confirms that an Al2O3 coating improves long‐term cycling stability, while CeO2‐coated thin films perform even worse than uncoated counterparts. The analysis of the surface reaction products using X‐ray photoelectron spectroscopy shows that both coatings are fluorinated upon contact with liquid electrolyte in agreement with thermodynamic considerations. The fluorinated Al2O3 coating is stable during cycling, resulting in the improved cell performance. In contrast, the fluorinated CeO2 coating changes chemical composition, facilitating corrosion of the NCM surface. The results demonstrate the importance of a detailed analysis of surface reactions to evaluate the suitability of ultrathin oxide layers as protective coatings for LIBs.

Keywords