Full Scale of Pore-Throat Size Distribution and Its Control on Petrophysical Properties of the Shanxi Formation Tight Sandstone Reservoir in the North Ordos Basin, China

Abstract

Pore-throat size distribution is a key factor controlling the storage capacity and percolation potential of the tight sandstone reservoirs. However, the complexity and strong heterogeneity make it difficult to investigate the pore structure of tight sandstone reservoirs by using conventional methods. In this study, integrated methods of casting thin section, scanning electron microscopy, high-pressure mercury intrusion (HPMI), and constant-pressure mercury intrusion (CPMI) were conducted to study the pore-throat size distribution and its effect on petrophysical properties of the Shanxi Formation tight sandstones in the northern Ordos Basin (China). Results show that pore types of the Shanxi tight sandstone reservoirs include intergranular pores, dissolution pores, intercrystalline micropores, and microfracture, while the throats are dominated by sheet-like and tube-shaped throats. The HPMI-derived pore-throat size ranges from 0.006 to 10 μm, and the pore-throats with a radius larger than 10 μm were less frequent. The pore body size obtained from CPMI shows similar characteristics with radii ranging from 100 to 525 μm, while the throat size varies greatly with radii ranging from 0.5 to 11.5 µm, resulting in a wide range of pore-throat radius ratio. The full range of pore size distribution curves obtained from the combination of HPMI and CPMI displays multimodal with radii ranging from 0.006 to 525 µm. Permeability of the tight sandstone reservoirs is primarily controlled by relatively larger pore throats with small proportions, and the permeability decreases as the proportions of smaller pore-throats increase. The pervading nanopores in the tight gas sandstone reservoirs contribute little to the permeability but play an important role in the reservoir storage capacity. A new empirical equation obtained by multiple regression indicates that r 15 (pore-throat size corresponding to 15% mercury saturation) is the best permeability estimator for tight gas sandstone reservoirs, which yields the highest correlation coefficient of 0.9629 with permeability and porosity.