CZECH WW2 CONCRETE FORTIFICATIONS: CORROSION PROCESSES AND REMEDIATION METHOD BASED ON CRYSTALLIZING COATING

Abstract

Concrete is a relatively new structural material, hence the remediation of concrete structures is very rare. There are a lot of concrete fortifications in the Czech Republic, which were built just before WW2. These bunkers formed a long defensive line along the Czechoslovak borders as a protection against Hitler’s army. Today, after 80 years, many of the bunkers are listed as Czech national technical monuments with a strict protection of their historical authenticity. The article describes the technical survey and the possible conservation method of a selected concrete fortification, which exhibits a number of moisture related problems. The studied two-storey, heavily fortified bunker is situated close to the northern border of the Czech Republic, former Czechoslovakia. A detailed survey of the building includes the analysis of the interior environment parameters and laboratory testing of the used concrete. A long-term diagnosis identified the main problem, which lies in the inhomogeneity of the used concrete and the relating massive water ingress. However, the monitored bunker currently does not serve as a military structure and, therefore, a simple solution to improve the internal environment was suggested on the basis of the conducted measurements. With respect to the main causes of failures, the authors suggested a conservation method based on using a crystallizing coating. The suitability of the method was first verified under laboratory conditions and then also on the real bunker.

Keywords

• fortification, WW2, concrete, corrosion, moisture, remediation, coating