Agriculture (Mar 2024)
Finite Element Simulation Parameter Calibration and Verification for Stem Cutting of Hydroponic Chinese Kale
Abstract
The finite element simulation is a valid way for the rapid development of the root-cutting mechanism for hydroponic Chinese kale. The stem of the hydroponic Chinese kale was simplified as a transverse isotropic elastic body, and axial compression, three-point bending, and shear tests were performed. The ANSYS/LS-DYNA19.2 software was adopted for stem shear simulation, and the regression equation of the maximum simulated shear force was established. The optimized mechanical parameters were determined by minimizing the deviation between the maximum shear force obtained from the simulation and test. The three-dimensional scanning method was employed to establish the geometric model of the hydroponic Chinese kale stem. The cutting finite element simulation model and test platform were constructed. Displacement, deformation, and force measured from simulation and test were compared. Through measurement and simulation calibration, an axial elastic modulus of 6.22 MPa, axial Poisson’s ratio of 0.46, radial elastic modulus of 3.56 MPa, radial Poisson’s ratio of 0.44, radial shear modulus of 0.8 MPa, and a failure strain of 0.08 were determined. During the cutting simulation and test, the resulting maximum displacement deviations of the marking points on the end of the stem were 0.68 mm along the X-axis and 2.83 mm along the Y-axis, while the maximum deviations of the cutting and clamping force were 0.49 N and 0.77 N, respectively. The deformation and force variation laws of the kale stem in the cutting simulation and test process were basically consistent. It showed that the mechanical parameters calibrated by the simulation were accurate and effective, and the stem cutting simulation results with the finite element method were in good agreement with that of the cutting test. The study provided a reference for the rapid optimization design of the root-cutting mechanism for hydroponic Chinese kale harvest.
Keywords