Comparison of alternative neutral detergent fiber methods to the AOAC definitive method

Abstract

ABSTRACT: Neutral detergent fiber (NDF) is the most commonly reported metric for fiber in dairy cattle nutrition. An empirical method, NDF is defined by the procedure used to measure it. The current definitive method for NDF treated with amylase (aNDF) is AOAC Official Method 2002.04 performed on dried samples ground through the 1-mm screen of a cutting mill with refluxing and then filtration through Gooch crucibles without (AOAC−; reference method) or with (AOAC+) a glass fiber filter filtration aid. Other methods in use include grinding materials through the 1-mm screen of an abrasion mill, using filtration through a Buchner funnel with a glass fiber filter (Buch), and use of the ANKOM system (ANKOM Technology, Macedon, NY) that simultaneously extracts and filters samples through filter bags with larger (F57) or smaller (F58) particle size retentions. Our objective was to compare the AOAC and alternative methods using samples ground through the 1-mm screens of cutting or abrasion mills. Materials analyzed were 2 alfalfa silages, 2 corn silages, dry ground and high-moisture corn grains, mixed grass hay, ryegrass silage, soybean hulls, calf starter, and sugar beet pulp. Samples were run in duplicate in replicate analytical runs performed on different days by experienced technicians. Compared with cutting mill–ground samples, the aNDF% of dry matter results from abrasion mill–ground samples were or tended to be lower for 8 of 11 samples. Method affected aNDF% results for all materials, with method × grind interactions for 6 of 11 samples. For ash-free aNDF% assessed with cutting mill–ground materials, a priori selected contrasts showed that the number of materials for which methods differed or tended to differ from the AOAC methods were 4 (Buch), 8 (F57), and 3 (F58); and 3 for AOAC– versus AOAC+. However, statistically different does not necessarily mean substantially different. For a given feed and grind, a positive value for the absolute difference between the AOAC– mean and an alternative method mean minus 2 times the standard deviation of AOAC− suggests that values for the alternative method fall outside of the range of results likely to be observed for the reference method. The number of observed positive values for materials processed with cutting and abrasion mills, respectively, were 0 and 2 (AOAC+); 2 and 2 (Buch); 8 and 10 (F57); 4 and 7 (F58); and 0 and 4 (AOAC−). With the materials tested, methods in order of agreement with the reference method were Buch, F58, and F57, which often gave lower values. The AOAC+ gave results similar to AOAC−, substantiating it as an allowed modification of AOAC−. Best agreement between the reference method and variant NDF methods was achieved with the 1-mm screen cutting mill grind. The 1-mm abrasion mill grind produced more aNDF% results that were lower than the reference method but with fewer differences when filter particle retention size was smaller. The use of filters that retain finer particles could be explored to improve comparability of variant NDF methods and grinds. Further evaluation with an expanded set of materials is warranted.

Keywords

• fiber
• neutral detergent fiber
• feed analysis
• methods