Oil & Gas Science and Technology (Nov 2006)

Détermination automatique de l'indice d'octane et de la composition des reformats par chromatographie en phase gazeuse Automatic Determination of Reformate Octane Number and Composition by Gas Chromatography

  • Petroff N.,
  • Boscher Y.,
  • Durand J. P.

DOI
https://doi.org/10.2516/ogst:1988015
Journal volume & issue
Vol. 43, no. 2
pp. 259 – 271

Abstract

Read online

Utilisant des analyses par chromatographie en phase gazeuse, diverses méthodes ont été testées pour calculer l'indice d'octane de reformats. L'une d'elles s'est imposée par la simplicité de l'appareillage, ses possibilités d'automatisation et son adéquation à des échantillons provenant de charges différentes. Cette étude décrit les conditions opératoires de la méthode chromatographique optimisées pour les réformes, en vue d'obtenir des valeurs calculées de l'indice d'octane (IO) dit Recherche différant de moins de un point des valeurs mesurées sur un moteur CFR selon la norme ASTM/D2699 (NF MO7026). L'analyse chromatographique est faite sur une colonne capillaire fonctionnant en température programmée. Le traitement des données est réalisé par un logiciel qui assure àla fois l'identification des constituants et le calcul de l'indice d'octane, à partir des données chromatographiques standard (temps de rétention et surface des pics). Les résultats obtenus portent sur une soixantaine de reformats divers. La fiabilité de la méthode d'identification, la répétabilité et la reproductibilité des valeurs de IO calculés sont démontrées. Ces résultats permettent d'envisager l'exploitation de la méthode en sortie d'unité. Various methods were tested by gas chromatography analysis for calculating the octane number of reformates. One of them was superior because of the simplicity of its equipment, its possibilities of automation and its suitability for samples coming from different feeds. This article describes the operating conditions of the optimized chromatographic method for reformates with a view to obtaining calculated values of the so-called Researchoctane number (RON) different by at least one point from the values measured with a CFR engine according to the ASTM/D2699 standard. Chromatographic analysis is performed in a capillary column operating with programmedtemperature. Data processing is done with a software ensuring both the identification of the constituents and the computing of the octane number from standard chromatographic data (retention time and peak area). The results obtained concern some 60 different reformates. The reliability of the identification method, the repeatability and the reproducibility of the RON values calculated are demonstrated. These results show that the method could be used for unit control.