The effect of lightweight geopolymer concrete containing air agent on building envelope performance and internal thermal comfort

Abstract

Innovative building materials are the primary focus for researchers seeking to reduce energy consumption and advance global sustainability initiatives. This target could accomplished by addressing environmental issues and confronting the adverse impact of climate change. In this regard, this paper used a combined experimental and simulation approach to evaluate the effectiveness of lightweight geopolymer concrete (LWGC) incorporating industrial waste of aluminum powder (AP) and ferrosilicon waste powder (FWP) for reducing the energy consumption in the building envelop. Seven concrete mixes for LWGC were prepared using an air operator. Three mixtures contain 0.1 %, 0.2 %, and 0.3 % AP (FA), and three mixtures contain 0.1 %, 0.2 %, and 0.3 % FWP by weight of fly ash. The workability, unit volume weight, compressive strength, thermal conductivity, and microstructure analysis of the LWGC were examined. In addition, energy simulations were performed to evaluate their ability to reduce energy use in residential buildings. The inclusion of AP and FWP in LWGC resulted in a significant decrease in the density of the material, which amounts to 55 % for AP0.3 and 35 % for FWP0.3. The diameter of the LWGC pore structure increased as the Ca/Si ratio was reduced. The AP and FWP materials reduced energy consumption for building envelope elements such as external walls and roof insulation by 14.5 %, resulting in a 9.2 % overall reduction compared to the traditional concrete mix as a control sample.

Keywords

• Aluminum powder
• Ferrosilicon waste powder
• Compressive strength
• Microstructure
• Thermal conductivity
• Green building