Deformation Analysis of Continuous Milling of Inconel718 Nickel-Based Superalloy

Abstract

As a difficult-to-process material, Inconel718 nickel-based superalloy is more and more widely used in aerospace, ocean navigation, and large-scale machinery manufacturing. Based on ABAQUS simulation software, this paper takes the milling force and temperature in the milling process of the nickel-based superalloy as the research object, and establishes the empirical formula for the prediction model of cutting force and cutting temperature based on the method of multiple linear regression. The significance of the prediction model was verified by the residual analysis method. Through data analysis, it is obtained: within a certain experimental range, the influence degrees of each milling parameter on the cutting force and cutting temperature are fz>ap>n and fz>ap≈n, respectively. The actual orthogonal cutting test was carried out on the machine tool, and the reliability and accuracy of the prediction model of cutting force, cutting temperature and tool wear amount were verified. The model formulas of the shear velocity field, shear strain field and shear strain rate field of the main shear deformation zone are constructed by using mathematical analysis methods. The influence law of cutting speed and tool rake angle on the variables of main shear zone is calculated and analyzed. Through the combination of theory and experiment, the relationship between cutting force, chip shape and machined surface quality in milling process was analyzed. Finally, with the increase in the cutting force, the serration of the chip becomes more and more serious, and the roughness of the machined surface becomes greater and greater.

Keywords

• milling force
• milling temperature
• multiple linear regression
• range analysis
• chip morphology
• tool wear