Assessment of the Natural Fiber Reinforced Bio-Polyethylene Composites Flexural Macro and Micromechanical Properties

Abstract

One of the most common load modes is flexure. The paper measures and models the flexural strength and modulus of a bio-polyethylene reinforced with thermos-mechanical fibers from corn stover. Moreover, the authors use modified rules of mixtures to evaluate the contribution of the reinforcements to the properties of the composite. It was found a high impact of coupling agent content on the strength of the composites, and materials with a 6% of such agent and 50% of reinforcement increased 181% the strength of the matrix, and 464% its modulus. The obtained values are noticeable higher than polypropylene and some of its composites. Micromechanics analysis shows that the effect of natural fiber reinforcement on the flexural properties of a bio-based PE is similar to the effects on a polyolefin. Thus, the use of fully bio-based composites can be proposed as a substitute for some oil-based polymers, partially bio-based materials, and their composites.

Keywords

• biocomposites
• injection molding, micromechanical analysis
• flexural properties
• natural fibers
• interface analysis