Applied Sciences (Nov 2022)
Integrated Module Antenna for Automotive UWB Application
Abstract
In this paper, an integrated module antenna for automotive UWB application is proposed. The target applications of the proposed antenna are for UWB localization and rear passenger detection. The purpose of this work is to design an antenna with a wide and narrow beamwidth that can be attached to the exterior/interior of a vehicle for simultaneous UWB localization and a rear passenger detection sensor with a single-module substrate in a limited space. For UWB localization, the wide beam coverage is required so the antenna receives the signal from any incident angle in horizontal plane. Meanwhile, the rear passenger detection sensor requires a relatively narrower beamwidth than the localization antenna for accurate detection within the vehicle. To integrate two different antennas into a single compact module substrate, modified ground stubs and parasitic radiators are applied. The size of the entire antenna structure is 35 mm × 65 mm × 1.156 mm. The proposed antenna designed on the multi-layered FR-4 substrate with a dielectric constant of 4.3. The bandwidth of the monopole is 6.14~8.24 GHz, and the patch array is 6.95~8.47 GHz. The isolation between the monopole and the patch array is less than −23 dBi in the target band. The performance of the proposed antenna is verified with simulation and measurement. In addition, a simulation of the proposed antenna with the real vehicle model is also conducted to verify the feasibility on actual vehicle. Based on this work, the proposed antenna can be applied to multi-function antenna for automotive application with low cost.
Keywords