Development and analysis of passive residual heat-removal system on secondary side of small reactor

Abstract

BackgroundPassive residual heat-removal system (PRHRS) based on natural circulation has been widely used in small reactors connected on secondary side loop.PurposeThis study aims to develop and analyze a passive residual heat-removal system on the secondary side of a small reactor to improve reactor safety.MethodsBased on the completed heat-transfer experiment of the intermediate circuit of a small integrated nuclear power plant, Reactor Excursion and Leak Analysis Program (RELAP) was employed to determine and analyze the natural circulation characteristics of the intermediate loop were determined and analyzed.ResultsThe heat transfer rate results of the program are in good agreement with the experimental data, and the natural cycle characteristics of PRHRS can be characterized. The pressure of the system loop is determined by the average temperature of the primary side of the steam generator (SG), and the difference in the inlet temperature of the SG primary side, mass flow rate, and height of the cooling and heating sources significantly influence the heat-transfer performance of the SG system. The heat-transfer performance of the waste-heat-removal system is more sensitive to the resistance of the system loop when the temperature of the primary-side inlet of the SG is higher.ConclusionsThese results provide a valuable application for further investigations of passive systems in small reactors.

Keywords

• small reactor
• natural circulation
• passive
• residual heat-removal system
• relap5