Journal of Analytical Science and Technology (Aug 2023)
Laboratory evaluation of a prototype portable gas chromatograph (GC) with a flame ionization detector (FID) for toluene, ethylbenzene, and xylenes (TEX) analysis
Abstract
Abstract The standard method to evaluate human exposure to volatile organic compounds (VOCs) is in general performed by sampling the air on sorbents followed by liquid extraction and detection using laboratory gas chromatograph (GC). The conventional method is time and labor intensive and employs a toxic solvent which adds a risk factor as well as waste. Hence, there have been increasing demands for portable GC instruments which allow near real-time, in-situ analysis. In this study, the potential use of a prototype, dual column portable GC (protoGC) with flame ionization detector (FID) was examined by comparing its performance with a conventional GC laboratory method. Four target concentration levels (1x, 2x, 4x, and 8x; x = 1.12 ± 0.01 ppm) of toluene, ethylbenzene, and o-, m-, and p-xylene were generated in an exposure chamber (24 ± 1 °C and 50 ± 5% RH). The challenge atmosphere was directly sampled and analyzed with protoGC while for the conventional method it was sampled on a sorbent tube and analyzed with a laboratory GC/FID. The results of protoGC correlated well with the conventional method (r = 0.991–0.999), indicating that protoGC has comparable performance with the conventional method within the test conditions. Although two-way ANOVA showed significant differences in mean concentrations between the methods, the differences were small. protoGC would be useful to monitor VOCs in air with high temporal resolution or to quickly determine the safety of the environment of interest due to the substantial time savings in sampling and analysis. Further examinations at various environmental conditions and other analytes will be necessary to thoroughly evaluate its performance.
Keywords
