Results in Engineering (Jun 2024)
Enhancing thermal efficiency in MHD kerosene oil-based ternary hybrid nanofluid flow over a stretching sheet with convective boundary conditions
Abstract
The increasing demand for thermal management due to the high heat density heat exchangers for different technological and industrial processes draw the attention of researchers in heat transfer analysis to investigate the simultaneous solution to this problem. Keeping this in mind, the current work addressed the utilization of ternary hybrid nanofluid, a mixture of graphene oxide with silver and copper, to examine the heat and mass transfer enhancement of MHD Maxwell fluid. In the current model, the author discussed heat and mass transfer analysis of Maxwell MHD ternary hybrid nanofluid flow across a porous medium over an extending sheet. The energy and concentration equations are expressed to include the effects of Brownian motion and thermophoretic diffusion. Additionally, the effects of thermal radiation, activation energy, chemical reactions, and convective boundary conditions are considered. The similarity transformations are used to convert the nonlinear PDEs into ODEs. The impact of embedded factors on velocity, temperature, and concentration profiles is perceived graphically and mathematically by using the HAM technique. The convergence of computed solutions is ensured by h-curves. The significant outcomes from the analysis expressed that the flow distribution increases with slip and suction/injection factors. The concentration of the ternary hybrid nanofluid increases with an increase in thermophoretic diffusion (0.1–0.5), thermal biot number, and solutal biot number (0.1–0.5), however, a declining behavior is perceived with rising quantity of Schmidt number (0.6–0.8) and Brownian motion (0.1–0.5) parameters. Nusselt number shows a dominant behaviour with a higher magnetic factor. Similarly, the skin friction increases with an increase in thermal biot number and thermophoresis factor. It is revealed that the skin friction along x− direction increases from (0.78138, 0.833702, 0.897022, and 0.972526) for ternary hybrid nanofluid. Nusselt number increases from 2 to 5% (0.208936, 0.214288, 0.219799, 0.22555) when the volume fraction varies from 0.01 to 0.04 respectively.
