Sensors & Transducers (Jul 2014)
Design of a WSN-Based Monitoring System for Avoiding Collision of Tower Cranes
Abstract
Tower cranes in large construction projects are likely to collide with other cranes close to them during the operation, which is a severe hazard to the security of the staff. Thus, a WSN- based monitoring system for avoiding collision of tower cranes is proposed. The 3D data positioning technology is used to install angle and position sensors at intervals in the cranes in order to collect position data in real time. After the data are sent to the upper computer, the computer calculates the distance using the 3D positioning technique and sets a proper threshold for alarm. When the measured distance is smaller than the threshold, the alarm is set off to prevent collision. In the experiment, three pairs of cranes 15-22 m in height that are located separately are tested in terms of errors in data collection and in alarms. The experimental results show that the proposed system has an alarm accuracy of 99.3 %, and thus, is highly applicable.
