Efficiency of sodium phytate in the remediation of As, Mn, and Cu contamination in acid mine drainage using water hyacinth

Abstract

The accumulation and uptake efficiency of heavy metals, including As, Mn, and Cu, in water hyacinth (Eichhornia crassipes (Mart.) Solms) grown in synthetic acidic wastewater supplemented with sodium phytate (SP) was examined. Three treatments were studied using synthetic acidic wastewater containing 0.25, 5.0, and 1.0 mg/L of As, Mn, and Cu, respectively, (SM + heavy metals) and having pH in the range of 4–6, which comprised of (1) control treatments using SM + heavy metals at pH 4, 5, 6 without SP, and treatments using SM + heavy metals at pH 4, 5, 6 with SP: Cu (2) in a 1:3 M ratio and (3) a 1:6 M ratio. The translocation factor (TF < 1) indicated that plants had a lower capacity to transport heavy metals from the roots to the stems. The shoots of water hyacinth exhibited the highest capacity to absorb and store As in the pH 4-treatment with SP (SP:Cu1:3 mol), whereas the roots showed the greatest capacity at pH 4 without SP. The roots and shoots of the water hyacinth showed the greatest capacity to take up and store Mn in the pH 5-treatment with a 1:3 M ratio of SP:Cu. The roots showed the greatest capacity to take up and store Cu in the pH 6-treatment, and the shoots showed the highest capability in the pH 5-treatment with 1:3 M ratio of SP:Cu. Moreover, analysis of the chemical forms revealed that As accumulated in the arsenate form, whereas Mn accumulated in the divalent form.

Keywords

• Sodium phytate
• Eichhornia crassipes
• Arsenic
• Manganese
• Copper
• Acid mine drainage (AMD)