Experimental study on an enhanced integral force feedback controller for active damping

Abstract

In this paper, an enhanced integral force feedback controller is proposed for implementing active damping. Compared with the classical integral force feedback, the pure integrator is replaced with a combination of a first-order low-pass filter and a proportional term. The control performance of the proposed controller is examined on a single-degree-of-freedom host system. In order to better understand the physics behind, a full equivalent mechanical model is derived. It is found that the first-order low-pass filter is mechanically equivalent to a spring and a damper connected in parallel. The proportional term mechanically represents a spring which is connected in series with the inherent actuator spring. The optimal control parameters are numerically obtained with the ℋ ∞ optimisation criterion. The analysis shows that the optimal feedback gain can be practically taken the same as that of the classical integral force feedback controller in the sense that the difference between the resultant control performance is negligible. The numerical study is also experimentally validated. The obtained results are found to correspond well with the theoretical developments.