Mechanical Performance of Patched Pavements with Different Patching Shapes Based on 2D and 3D Finite Element Simulations

Abstract

Patching is a common technology used in repairing asphalt-pavement potholes. Due to the differences in material properties between patched- and unpatched-asphalt mixtures, significant strain and stress concentrations could be induced; thus, further cracks and interfacial debonding distress could be caused. As a remedy, the strain and stress concentrations can be alleviated by utilizing optimum patching shapes. Therefore, this paper employed finite element methods (FEM) to deeply analyze the mechanical performance of patched-asphalt pavements embedded with different patching shapes. Three patching shapes, these being rectangular, stair, and trapezoid, were considered for use in pavement pothole repairs based on two- and three-dimensional finite element models. In the two-dimensional models, Top-Down and Bottom-Up crack propagations were simulated to assess the anti-damage performance of the patched pavements with different patching shapes. In addition, the thermal stress behaviors within patched-asphalt pavements were simulated using the two-dimensional model to analyze the performance of the patched pavements during the cooling process in construction. In addition, interface-debonding performance was simulated for the patched-asphalt pavements using three-dimensional models. In light of the simulation results, engineers are expected to better understand the mechanism within patched pavements and to improve the quality of the pavement patching.

Keywords

• patching shape
• finite element method (FEM)
• crack propagation
• thermal stress
• interface debonding