Composition and Evaluation on Road Performance of SBS/PTW High-Viscosity-Modified Asphalt and Its Mixtures for Ultrathin Overlays

Abstract

As a highway pavement maintenance technology, the road performance of the ultra-thin overlay depends heavily on the performance of asphalt cement. For the preparation of high-performance-modified asphalt suitable for ultrathin overlay, the reactive blending technology was used based on SBS modified asphalt and combined with a penetration test, softening point test, ductility test, dynamic viscosity test, and viscous toughness test to study the optimal blending ratio of high-viscosity modified asphalt. Further, the rolling thin-film oven test (RTFOT), dynamic shear rheological (DSR) test, and Brookfield viscosity test are used to evaluate the technical properties of SBS/PTW modified asphalt under the best mixing ratio. Finally, the SMA-13 asphalt mixture was prepared with SBS/PTW high-viscosity modified asphalt and evaluated through a rutting test, low-temperature bending test, immersion Marshall test, freeze-thaw splitting test, structural depth test (TD), and British pendulum number (BPN) test. These results showed that the best blending mass ratio of high-viscosity modified asphalt is 6% SBS + 4% solubilizer + 0.2% PTW + 0.2% nano-ZnO. All technical property indexes of the prepared SBS/PTW high-viscosity modified asphalt meet the requirements of an ultra-thin overlay binder. The dynamic viscosity at 60°C reaches 64204 Pa·s, and the viscosity and toughness are 25.4 N·m and 20.9 N·m, respectively. SBS/PTW high-viscosity modified asphalt under dynamic shear rheology (DSR) test is classified as PG88 at high temperature. The rutting factor changes the smallest before and after aging, and it has excellent anti-aging performance. Furthermore, the asphalt mixture prepared by SBS/PTW high-viscosity modified asphalt has excellent high and low-temperature performance, water stability, and skid resistance performance. All properties meet the requirements of the ultra-thin overlay. This study demonstrated that the SBS/PTW high-viscosity modified asphalt possessed high viscosity properties, which can be used in the ultra-thin overlay and other highly demanding working environments.