npj Clean Water (Sep 2022)

Advanced natural hydrated iron-alum oxides cation exchange resin for simultaneous phosphate and hardness removal

  • Le Ba Tran,
  • Trung Thanh Nguyen,
  • Surapol Padungthon,
  • Tri Thich Le,
  • Quynh Anh Nguyen Thi,
  • Nhat Huy Nguyen

DOI
https://doi.org/10.1038/s41545-022-00188-9
Journal volume & issue
Vol. 5, no. 1
pp. 1 – 11

Abstract

Read online

Abstract In this study, a hydrated iron-alum oxides-contained cation exchange resin (HIAO/225H) was synthesized for the first time from natural alum-ferric water of acid sulfate soil to improve the water quality. The HIAO/225H material was then characterized by FTIR, XRD, SEM, and EDX-mapping techniques and applied for phosphate and hardness removal tests. The phosphate removal by the HIAO/225H material reached equilibrium after 50 h with the highest adsorption capacity of 2.075 mg P g−1 (e.g., 69.16 mg P g−1 Fe) at pH 6, which was 1.12, 11.15, and 2.11 times higher than by hydrated ferric oxide/225H material, anion exchange resin (Akualite A420), and amphoteric ion exchange resin (MB6SR), respectively, under the same experimental conditions. The reason for the higher phosphate adsorption efficiency of HIAO/225H than the hydrated ferric oxide/225H material may be that HIAO contains Ca, Mg, and Al elements, leading to an easy formation of FeOOH on the surface. Particularly, HIAO/225H material was also effective for both hardness and phosphate removal with an adsorption capacity of 15.6 mg Ca g−1, 9.4 mg Mg g−1, and 1.825 mg P g−1, which is higher 1.2 times than the phosphate removal only. This may be due to co-precipitation to form Ca3(PO4)2 and Mg3(PO4)2 with the support of cation exchange resins. These results showed that the HIAO/225H material has a good performance in removing both phosphate and hardness, which could be applied in practical water and advanced wastewater treatment.