Optimization design of hydrocyclone with overflow slit structure based on experimental investigation and numerical simulation analysis

Abstract

Abstract This study aims to address the issue of high energy consumption in the hydrocyclone separation process. By introducing a novel slotted overflow pipe structure and utilizing experimental and response surface optimization methods, the optimal parameters were determined. The research results indicate that the number of slots, slot angles, and positioning dimensions significantly influence the performance of the hydrocyclone separator. The optimal combination was found to be three layers of slots, a positioning dimension of 5.3 mm, and a slot angle of 58°. In a Φ100mm hydrocyclone separator, validated through multiple experiments, the separation efficiency increased by 0.26% and the pressure drop reduced by 24.88% under a flow rate of 900 ml/s. CFD simulation verified the reduction in internal flow field velocity and pressure drop due to the slotted structure. Therefore, this study provides an effective reference for designing efficient and low-energy hydrocyclone separators.