Effect of Chemical and Physical Treatments on Mechanical Properties of Diss Fibers-Based Biocomposites Materials

Abstract

This work highlights the exploitation of fibers from a promising plant, commonly called Diss, in polymer matrix reinforcement. In this context, various untreated and treated (with acetic acid, silane, NaOH, thermal) Diss fibers were used to reinforce a thermoplastic matrix, polypropylene (PP). The effect of fiber treatments was evaluated at a ratio of 10% (by mass) of fiber, using mechanical, microstructural and physical characterization. A fiber content optimization study was carried out after choosing the fiber treatment by varying the fiber content from 10% to 40%. The microstructure observations showed a multi-layer structure for the biocomposites studied. The particular morphology of Diss fibers, with the presence of thorns, seems to improve the mechanical adhesion between the two phases. For 10% fiber content composites, the incorporation of the different fibers in the PP matrix led to improvements in most mechanical properties. The biocomposite reinforced with NaOH treated fibers (NPP-10%) showed the best mechanical performance with an improvement of 30%, 22% and 9% in tensile modulus, bending modulus and bending stress, respectively. For the fiber content variation, the NPP was retained, and an enhancement in the tensile modulus was found when the fiber content was below 20%.

Keywords

• biocomposite
• diss fibers
• fibers treatments
• sem observation
• mechanical characterization