Picotaur: A 15 mg Hexapedal Robot with Electrostatically Driven, 3D‐Printed Legs

Abstract

Dynamic and agile locomotion in legged robots enables them to overcome obstacles and navigate complex and unstructured terrain. However, the leg mechanisms and actuators needed for versatile locomotion are much more challenging to manufacture and integrate in sub‐gram scale robots. Herein, Picotaur, a 15.4 mg hexapedal robot with legs that enable various locomotion tasks such as turning, climbing 3D‐printed stairs, and pushing loads for the first time at these size scales, is presented. 3D printing with two‐photon polymerization enables the manufacture of electrostatically driven 2 degrees of freedom legs on a robot body made from a flexible printed circuit board. Based on simple control inputs, Picotaur can achieve alternating tripod gaits, reaching speeds up to 57 mm (7.2 body lengths) per second, as well as pronking gaits to tackle a wider variety of terrain. This approach to manufacturing and controlling legged robots at smaller scales provides a path forward toward robots that can be used for practical applications ranging from inspection to exploration and rival the performance of insects at similar size scales.

Keywords

• 3D printing
• legged locomotion
• microrobots
• two‐photon polymerization