Influence of Cavitation and Shaft Deformation in the Analysis of Lubrication of the Stern Bearing

Abstract

The cavitation phenomenon and shaft deformation have a significant impact on the tribological performance of the journal bearing. A mixed lubrication model is developed that takes into account surface roughness and asperity contact, as well as the effects of cavitation and deflection. The fluid–solid coupling effect in bearing deformation, asperity contact, and film pressure are investigated. The effect of boundary conditions on the lubrication regimes is discussed. The results of simulations with and without cavitation are compared under steady-state conditions. The results show that when cavitation is considered by the mixed lubrication model under a given load, the eccentricity is reduced, and the maximum oil film pressure is also reduced. The speed range of the bearing simulated with the mixed lubrication model increases after considering deflection deformation. The mixed lubrication model proposed in this paper is able to provide accurate results of pressure distribution and coefficient of friction and can be applied in the design and analysis of journal bearings.

Keywords

• cavitation effect
• shaft deformation
• mixed lubrication
• micro-convex
• journal bearing