A 3D-Printed Honeycomb Cell Geometry Design with Enhanced Energy Absorption under Axial and Lateral Quasi-Static Compression Loads

Abstract

This work presents an innovative honeycomb cell geometry design with enhanced in-plane energy absorption under quasi-static lateral loads. Numerical and experimental compression tests results under axial and lateral loads are analyzed. The proposed cell geometry was designed to overcome the limitations posed by standard hexagonal honeycombs, which show relatively low stiffness and energy absorption under loads that have a significant lateral component. To achieve this, the new cell geometry was designed with internal diagonal walls to support the external walls, increasing its stiffness and impact energy absorption in comparison with the hexagonal cell. 3D-printed unit-cell specimens made from ABS thermoplastic material were subjected to experimental quasi-static compression tests, in both lateral and axial directions. Energy absorption was compared to that of the standard hexagonal cell, with the same mass and height. Finite element models were developed and validated using experimental data. Results show that the innovative geometry absorbs approximately 15% more energy under lateral compression, while maintaining the same level of energy absorption of the standard hexagonal cell in the axial direction. The present study demonstrates that the proposed cell geometry has the potential to substitute the standard hexagonal honeycomb in applications where significant lateral loads are present.

Keywords

• honeycomb
• cell geometry
• sandwich panels
• energy absorption
• lateral loads
• 3D-printing