Design and preparation of woven fabric-reinforced substrate: A new pathway for robust thin film composite membrane

Abstract

The thin film composite (TFC) membrane possesses the highest commercial application potential among all types of forward osmosis (FO) membranes. The support layer of the membrane plays a crucial role in both bearing mechanical loads and facilitating the active layer formation. Herein, we addressed the issues of low permeability and poor mechanical strength of the conventional TFC FO membrane by selecting suitable fabrics and optimizing membrane design and preparation. Polyester (PS) woven fabric, with its high strength, low thickness, and high porosity, served as an excellent material for reinforcing the strength of the FO membrane. We employed a novel double-blade casting method to address the defect issue associated with the conventional single-blade casting method. The influencing factors and quality control strategies of the fabric-reinforced substrate were systematically investigated. Furthermore, membrane characterization techniques, including scanning electron microscopy (SEM), liquid-liquid displacement porometer, and cross-flow FO system, were used to reveal the influences of different substrates, including polysulfone (PSU), polyacrylonitrile (PAN), and polyetherimide (PEI), on the structure and performance of the fabric-reinforced TFC-FO membrane. Compared to commercial FO membranes, the TFC/PSU membrane exhibited superior FO performance, with a water flux of 24.1 LMH, and outstanding mechanical strength that was more than 10-times higher than that of free-standing membranes. This study demonstrates a new pathway for engineering robust TFC-FO membranes with low structural parameters as well as excellent scalability of the membrane fabrication method.

Keywords

• Forward osmosis
• Woven fabric
• Thin film composite
• Support layer chemistry
• Double-blade casting