Modeling of microstructure evolution of AZ80 magnesium alloy during hot working process using a unified internal state variable method

Abstract

In this paper, a unified internal state variable (ISV) model for predicting microstructure evolution during hot working process of AZ80 magnesium alloy was developed. A novel aspect of the proposed model is that the interactive effects of material hardening, recovery and dynamic recrystallization (DRX) on the characteristic deformation behavior were considered by incorporating the evolution laws of viscoplastic flow, dislocation activities, DRX nucleation and boundary migration in a coupled manner. The model parameters were calibrated based on the experimental data analysis and genetic algorithm (GA) based objective optimization. The predicted flow stress, DRX fraction and average grain size match well with experimental results. The proposed model was embedded in the finite element (FE) software DEFORM-3D via user defined subroutine to simulate the hot compression and equal channel angular extrusion (ECAE) processes. The heterogeneous microstructure distributions at different deformation zones and the dislocation density evolution with competitive deformation mechanisms were captured. This study can provide a theoretical solution for the hot working problems of magnesium alloy.

Keywords

• AZ80 magnesium alloy
• Internal state variable model
• Microstructure evolution
• Dynamic recrystallization
• Hot working process
• Finite element simulation