Adsorption Characteristics of Hair Dyes Removal from Aqueous Solution onto Oak Cupules Powder Coated with ZnO

Abstract

Three hair dyes of Arianor madder red 306003 (R), Arian or Straw Yellow 306005 (Y), and Arianor ebony 306020 (E) were removed from an aqueous solution in a batch mode using a powder of oak cupules coated with ZnO (COZ). The COZ-adsorbent material was characterized in terms of XRD, FT-IR, and SEM analysis. The best conditions for the uptake of hair dyes by COZ were investigated. For Y dye, the best uptake was estimated on 0.06 g of COZ at 7.0 pH for 150 min. The E dye uptake requires 120 min on 0.05 g of COZ at 9.0 pH. For E hair dye, kinetic data revealed a pseudo-first-order model for E hair dye and a pseudo-second-order model for R and Y. Equilibrium data exhibited consistency with the Langmuir isotherm model for the adsorption of E dye onto COZ, and the Freundlich isotherm model for the adsorption of R and Y hair dyes onto COZ. Isotherms models of D-R and Temkin were also examined. The thermodynamic parameters (−ve ∆G and +ve ∆H and ∆S) demonstrated that the removal of hair dyes by COZ is spontaneous, endothermic, and feasible. The adsorption capacity of COZ for R, Y, and E uptake was found to be 55.5, 52.6, and 135.1 mg·g−1, respectively. Furthermore, COZ reusability was demonstrated after five cycles of regeneration, with a negligible decline in adsorption extent (13.08%, 13.85, and 10.20% for R, Y, and E, respectively) in comparison to its initial capacity.

Keywords

• adsorption
• hair dyes
• ZnO
• oak
• kinetics
• thermodynamic