High-Reliability Rotor Position Detection Method for Sensorless Control of Synchronous Condenser

Abstract

Static frequency converters (SFCs) are very important for starting the connection of synchronous capacitors to the power grid, which is beneficial for ensuring the impact of electric vehicle connection on the inertia of the power grid. In the traditional sensorless initial rotor position detection method, the signal-to-noise ratio of the induced voltage at the machine terminal is small, making it difficult to accurately extract the rotor position. In this study, a reliable initial position detection method for a sensorless-controlled synchronous machine drive is proposed. A step excitation voltage was applied to the excitation circuit before the motor was started, and the three-phase induction voltage at the terminals was sampled in real time. The sampling signal was processed in two ways: digital filter processing and stator flux calculation. The accuracy of the initial rotor position is determined by comparing the differences between the two results. This algorithm does not depend on additional hardware circuits and has fewer setting parameters; therefore, it is easy to apply in engineering applications. Finally, a comparative experiment was conducted using a real-time digital system (RTDS) to verify the feasibility and effectiveness of the proposed method. The proposed rotor position detection method can effectively improve the detection reliability and ensure the start-up reliability of SFCS.

Keywords

• static frequency converter
• rotor initial position detection
• synchronous condenser
• speed sensorless