Nauka ta progres transportu (Dec 2014)
TO THE MODELING ISSUES OF LIFE CYCLE OF DEFORMATION WORK OF THE RAILWAY TRACK ELEMENTS
Abstract
Purpose. This article highlightsthe operational cycle modeling of the railway track elements for the development processes study of deformability as the basis of creating a regulatory framework of the track while ensuring the reliability of the railways. Methodology.The basic theory of wave propagation process in describing the interaction of track and rolling stock are used to achieve the goal. Findings. The basic provisions concerning the concept «the operational cycle of the deformation track» were proposed and formulated. The method was set. On its base the algorithm for determining the dynamic effects of the rolling stock on the way was obtained. The basic principles for the calculation schemes of railway track components for process evaluation of the deformability of the way were formulated. An algorithm was developed, which allows getting the field values of stresses, strains and displacements of all points of the track design elements. Based on the fields of stress-strain state of the track, an algorithm to establish the dependence of the process of deformability and the amount of energy expended on the deformability of the track operation was created. Originality.The research of track reliability motivates the development of new models, provides an opportunity to consider it for some developments. There is a need to define the criteria on which the possibility of assessing and forecasting changes in the track states in the course of its operation. The paper proposed the basic principles, methods, algorithms, and the terms relating to the conduct of the study, questions the reliability of the track. Practical value. Analytical models, used to determine the parameters of strength and stability of tracks, fully meet its objectives, but cannot be applied to determine the parameters of track reliability. One of the main factors of impossibility to apply these models is a quasi-dynamic approach. Therefore, as a rule, not only one dynamic process of the railway track is prepared and assayed, but also its consequences. In addition, such models are flat, that also adds some complexity to compare the results with the experiment, since the process is not easy to distinguish the bulk of its limited influence in parts. The application of numerical methods extends the capabilities, and makes it impossible to consider the dynamic process, because it is impossible to introduce the processes that govern the response to the load. Therefore, the proposed modeling makes it possible to examine directly the dynamic process and evaluate the process due to the new criterion, the operational cycle of the strain gauge.
Keywords
