On the application of surfactant and water alternating gas (SAG/WAG) injection to improve oil recovery in tight reservoirs

Abstract

Tight reservoirs are considered one of the unconventional hydrocarbon reservoirs with low permeability and porosity, directly affecting the oil production rate rather than conventional reservoirs. Thereby, optimum enhanced oil recovery methods would help petroleum industries produce more oil volumes from these reservoirs. In this study, different chemical and thermal enhanced oil recoveries methods such as surfactant alternating gas (SAG), water alternating gas (WAG), surfactant and foam flooding, and carbon dioxide (continuous and cyclic) were experimentally investigated to measure oil recovery factor. According to the results of this study, 3.5% of surfactant concentration, 0.15 PV of surfactant slug size, and 0.75 PV was selected as the total surfactant injection volume was selected as the optimum concentration for the injectivity performances. SAG scenario provided the highest oil recovery factor among all injectivity scenarios. It is about 54% that indicated the best efficiency of enhanced oil recovery methods in tight reservoirs rather than conventional recovery methods. The second highest oil recovery factor is dedicated to the WAG injectivity scenario regarding the feasibility of CO2 phase through porous media. It is about 46%. Moreover, due to the -gas phase in WAG and SAG, water cut had fluctuated as the water and gas had been alternatively injected into the core samples.

Keywords

• Tight reservoirs
• Surfactant alternating gas
• Water alternating gas
• Surfactant concentration
• Oil recovery
• Water cut