Simulation analysis of the effect of a small amount of fine particle added to a slurry on the liquid behavior and forces acting on the main particles

Abstract

The viscosity of highly concentrated slurries is reduced by adding a small amount of fine particle with the same material of main particles (high concentration ratio particles per total concentration) in the slurries. We investigated how added fine particles affect the liquid behavior and forces acting on the main particles in the slurry by using direct numerical simulations, and we examined one factor that contributes to the viscosity reduction mechanism in highly concentrated slurries containing a small amount of fine particle. The results indicated that whether fine particles are coated (they contact) on the surface or not have little influence on the change in forces acting on the main particles. In highly concentrated slurries containing a small amount of fine particle, there was a large change in the liquid velocity between and around the main particles. From these results, we proposed a possible mechanism to assist in reducing the viscosity of highly concentrated slurries containing a small amount of fine particle. The magnitude and direction of the forces acting on each main particle were non-uniform by adding fine particles, resulting in non-uniform strength within the main particle bed in the slurry, which could facilitate particle bed deformation and assist in reducing the viscosity.

Keywords

• Addition of fine particles
• High-concentration slurry
• Viscosity reduction of slurry
• Direct numerical simulation
• Acting force of fluid on particle