Journal of Advanced Research (Nov 2021)
Understanding mechanisms of shape memory function deterioration for nitinol alloy during non-equilibrium solidification by electron beam
Abstract
Introduction: As an important advanced functional material, the memory effect of nitinol shape memory alloy (SMA) is the focus of research. According to the current research, the memory function of the alloy decreases after welding, and there is no sufficient explanation for the phenomenon. Objectives: For the problem, this research is to explore the underlying causes of the decrease of shape memory function after welding by analyzing the microstructure and micro defects. Methods: The vacuum electron beam welding tests of 1 mm thick Ni50Ti50 alloy plate was carried out to determine the appropriate welding process parameter. And the shape memory function of the welded joint was compared with that of the base metal to analyze the change of memory function. Results: It was found that the shape memory function of the welded joint decreased significantly under different strain variables. And the phase transition temperature also changed. Conclusions: This was due to the micro stress field produced by non-equilibrium solidification in molten pool promoted the formation and propagation of dislocations, increasing the dislocation density in the martensite. Dislocations entangled with each other in the martensite, showing a grid-like distribution, which destroyed the integrity of martensite substructure. At the same time, the twin substructure of martensite was often accompanied by vacancies, dislocations, stacking faults, and a consequently large stress field formed between twin planes due to lattice distortion. Secondary twin was identified inside martensite under micro shear stress, where the martensite showed the bending state. The habitual relationship between martensite phase and parent phase was destroyed, resulting in the decrease of shape memory function.
