Buckling Behavior of Stainless Wave-Shaped Pressure Hulls

Abstract

This study primarily focuses on the buckling behavior of wave-shaped pressure hulls subjected to uniform external pressure. The effect of slant angle on the buckling behavior of hulls was examined. The tested slant angles ranged from 0° to 30° and were increased at 1° increments. The buckling of smooth cylindrical pressure hulls and wave-shaped pressure hulls was investigated using numerical methods. A wave-shaped pressure hull was produced for experimental verification. The nonlinear numerical results aligned with the collected experimental data. The buckling load of the tested wave-shaped pressure hull was approximately 1.87 times that of the equivalent cylindrical pressure hull. Furthermore, a formula was developed to estimate the load-bearing capacity of the wave-shaped pressure hull. This formula, which has been experimentally validated, comprises a correction coefficient (obtained through numerical evaluation and regression analysis) and a classic semi-analytical formula for cylindrical pressure hulls.

Keywords

• wave-shaped pressure hull
• nonlinear buckling
• slant angle
• buckling estimated formula
• external pressure