Microstructure and tensile properties of heat-treated Ti-Mo alloys

Abstract

Current research is focused on development of β-type titanium alloys for biomedical applications as substitutes of the undesirable Ti6Al4V alloy. Ti6Al4V alloy has a higher elastic modulus (110 GPa) than that of the human bone (10-30 GPa) and this mismatch in elastic moduli can cause stress shielding effect, which can cause bone resorption and implant failure. Moreover, the dissociation of vanadium and aluminium can cause long term diseases including Alzheimer, neuropathy. β-type titanium alloys are potential substitute materials due to their good biocompatibility and the β phase has a lower elastic modulus. The aim was to study the microstructure and tensile properties of heat-treated Ti-xMo alloys (x= 8 & 10wt%). Phase analysis was conducted using X-ray diffractometer, while the microstructure was observed using an optical microscope. The tensile properties were examined using a tensile test machine. Acicular structures of α" phase precipitated in the β matrix in Ti-8Mo alloy, while Ti-10Mo alloy showed predominant β phase. The theoretically predicted phase constituents were not consistent with the experimental findings. Ti-10Mo alloy possessed superior yield and tensile strengths, larger elongation, and lower elastic moduli than that of Ti6Al4V alloy. Based on the obtained findings, the Ti-10Mo alloy can be a potential candidate for orthopaedic application. acicular structures of α" phase.