Temperature-Dependent Surface Charge and Flashover Behaviors of Oil-Paper Insulation Under Impulse With Superimposed DC Voltage

Abstract

Oil-paper insulation will inevitably endure impulse voltage with a superimposed dc voltage (superimposed voltage) because of introduced lightning or switching, which can induce charge accumulation and trigger flashover during the operation of a converter transformer. Temperature rise is also a nonnegligible factor that can significantly influence the performances of oil-paper insulation. This paper aims to reveal the effects of ambient temperature and superimposed voltage on surface charge and flashover behaviors in an oil-paper insulation system. Surface potential decay (SPD) experiments were performed under superimposed voltage with various polarity and amplitude combinations and at the temperature ranging from 20 °C to 80 °C. The results show that the initial surface potential and decay rate increase as the amplitude of the impulse voltage increases at 20 °C. The initial surface potential declines, and the process of SPD is accelerated at higher temperatures because of the increased concentration of shallow traps. Subsequently, flashover tests were conducted under superimposed voltage. It is found that flashover occurs after applying superimposed voltages even with a rather low dc voltage. In addition, the dc voltage component is primarily responsible for flashover. Weibull results also indicate that it is prone to trigger flashover at higher temperatures, because thermal excitation helps more carriers to escape from deep traps and participate in the process of flashover. Accordingly, the insulation characteristics of oil-paper system can be significantly influenced by superimposed voltage and temperature, which should draw great concern among the power grid.

Keywords

• Oil-paper insulation
• impulse with superimposed dc voltage
• temperature rise
• surface charge
• trap distribution
• flashover