Design and Temperature Uniformity Optimization of Electromagnetic Heating Hot Plate for Tire Vulcanizing Machine

Abstract

To address the issue of uneven temperature distribution during the tire vulcanization process based on electromagnetic heating, this study focuses on the hot plate of a tire vulcanizing machine. An octagonal hot plate with dimensions of 1380 mm × 1380 mm × 60 mm was adopted, and temperature sensors were installed to monitor temperature changes in real time. Through electromagnetic simulation, the effects of current intensity, frequency, and coil-to-hot-plate distance on temperature uniformity were studied. The simulation results show that the temperature difference increases with current intensity and current frequency, while the temperature difference decreases with the increase in coil-to-hot-plate distance. To minimize the temperature gradient, the coil layout was structurally optimized based on the geometric features of the hot plate to improve magnetic field distribution. Several coil arrangements were designed and compared, including uniform, dual-ring, multi-ring, and the newly proposed flower-shaped configuration. It shows that the multi-ring circular coil has the best uniformity when heating a circular hot plate, and the flower-shaped coil has best temperature uniformity when heating an octagonal hot plate. Experimental validation using an industrial-scale prototype confirmed that the optimized design reduced temperature variation to within ±2 degrees Celsius. This work contributes a practical and geometrically informed coil design strategy for improving the temperature uniformity and energy efficiency of electromagnetic heating systems in industrial tire vulcanization.

Keywords

• tire vulcanizing machine
• electromagnetic heating
• hot plate
• temperature uniformity