Two‐phase switched reluctance motor with hybrid excitation: Modeling and evaluation

Abstract

Abstract Switched reluctance machines offer a robust structure, inexpensive maintenance, and a low‐cost drive. However, they can suffer from low mean torque, low torque density, and high noise. Techniques such as offering the stator poles at each phase in the shape of a C core, adding several teeth to the two poles of each C‐core, and embedding permanent magnets to overcome these deficiencies are presented. Permanent magnets are embedded into the structure to create a hybrid excitation that provides a higher torque density. The C‐core stator modules of the stator are toothed to improve the torque. The radial forces on the shaft are balanced. The design procedure, operating principles, and performance trade‐offs are explained. Also, a magnetic equivalent circuit model is introduced. The model provides continuous relationships over the operating regions and incorporates core saturation and accurate flux tubes to attain high precision. Finite element models are also employed in the analysis and design process. The motor is prototyped, and experimental results are extracted, closely matching those obtained with the model and finite‐element analysis.

Keywords

• finite element analysis
• permanent magnets
• reluctance machines