Application of acoustic emission to the analysis of phase transformations in 27MnCrB5-2 steel tests during continuous cooling

Abstract

The goal of the research was to analyze the acoustic emission signal recorded during heat treatment. On a special stand, samples prepared from 27MnCrB5-2 steel were tested. The steel samples were heated to 950°C and then cooled continuously in the air. Signals from phase changes occurring during cooling were recorded using the system for registering acoustic emission. As a result of the changes, Widmanstätten ferrite and bainite structures were observed under a scanning microscope. The recorded acoustic emission signal was analyzed and assigned to the appropriate phase transformation with the use of artificial neural networks.

Keywords

• microstructure
• phase transformation
• ultrasonics
• acoustic emission
• continuous cooling