Physical Review Accelerators and Beams (Oct 2024)

Tapering-enhanced high-efficiency THz waveguide oscillator

  • Y. N. Yang,
  • A. Fisher,
  • P. Musumeci,
  • R. K. Li,
  • M. Kravchenko,
  • R. Agustsson,
  • Y. Chen,
  • A. Murokh

DOI
https://doi.org/10.1103/PhysRevAccelBeams.27.100701
Journal volume & issue
Vol. 27, no. 10
p. 100701

Abstract

Read online Read online

Using a waveguide in a THz FEL has been shown to maximize the coupling and enable efficient extraction of relativistic electron beam energy from a single passage through a tapered helical undulator. An oscillator configuration can further boost energy extraction above the single-pass limits and open the door toward very high average power THz sources. Embedding the undulator in an oscillator cavity is particularly useful in combination with high repetition rate electron sources, even if at reduced peak brightness, since recycling a fraction of the radiation as an intense seed can compensate for lower single-pass gain. In this paper, we investigate the efficiency scaling of a tapering-enhanced waveguide oscillator, showcasing its capability for frequency-tuning operation and high-efficiency operation at different wavelengths. Using a thermionic-driven beamline equipped with compression elements, numerical start-to-end simulation results indicate a 16% efficiency at 200 GHz and a 2.1% efficiency at 1.5 THz, resulting in kW-level average power out-coupled in radiation pulses with few hundred μJ energy and tens of MW peak power.